XRT7300

DS3/E3/STS-1 Line Interface Unit
Data Sheets OBS (Obsolete)

Overview

# of Channels 1
Data Rate(s) DS3, E3, STS-1
Clk Rec Yes
SH/LH n/a
Temperature Range (°C) Ind.
Op Pwr Sup/Max Cur 5V ±5%
Package LQFP-44
Show more

Exar's XRT7300 DS3/E3/STS-1 transceiver is an integrated solution which combines and enhances the present XRT7295/XRT7298 two-chip solution. The device contains both the receiver and transmitter to support the data rates at DS3 (44.736Mbps), E3 (34.368Mbps) or STS-1 (51.84Mbps).

The XRT7300 is a full featured Line Interface Unit (LIU). In the transmit direction, it accepts digital clock and data from the terminal equipment, usually a TDM framer (XRT7250), or an ATM UNI (XRT7234/XRT7245). It optionally encodes the data, and converts it into the appropriate pulse shapes for transmission over coaxial cable. In the receive direction, it accepts a bipolar signal from the line, optionally performs equalization, converts the line signal into a dual rail binary data stream, recovers the clock, optionally decodes the data, and coverts it into a dual rail digital signal.

The XRT7300 transceiver has several key features. It is compliant with all applicable ITU-I, ANSI, and Bellcore standards including, but not limited to, ITU-T G.775, G.823_1993, G.824, Bellcore TR-NWT-000499, and ANSI T1.404. Apart from the standard features such as built-in B3ZS/HDB3 encoder/decoder, and pulse shaping circuitry, the XRT7300 transceiver offers a fully integrated clock recovery circuit.

Additionally, it incorporates an on-chip transmit clock duty-cycle correction circuit to guarantee pulse template compliance without the need for a tightly controlled transmit clock (similar feature to XRT7298). It supports error detection and declaration (in compliance with G.775) for Loss of Signal (LOS), Loss of Lock (LOL), and Line Code Violations (LCV). It supports either transformer coupling or capacitive coupling to the receiver line interface.

When transformer coupling is used, the XRT7300 transceiver operates with a less expensive, and more stable (over temperature), 1:1 transformer for both transmit and receive line connections. The XRT7300 transceiver can be operated in either a hardware mode or host mode. The XRT7300 transceiver can be configured (through either external signals or microprocessor interface) to any of the three data rates WITHOUT changing any external components.

The XRT7300 is aimed at telecommunications and networking equipment manufacturers supporting DS3/E3 interfaces. It is well suited for WAN networking applications such as routers and bridges, ATM switches, DSLAMs, ADMs, and DS3/E3 line cards. The XRT7300 transceiver and companions XRT7250 framer or XRT7234/45 ATM UNIs offer a single silicon source for DS3/E3 networks.

  • Meets E3/DS3/STS-1 Jitter Tolerance Requirements
  • Full Loop-Back Capability
  • Transmit and Receive Power Down Modes
  • Full Redundancy Support
  • Contains a Four-Wire Microprocessor Serial Interface
  • Uses Minimum External components
  • Requires Single +5V Power Supply
  • -40°C to +85°C Operating Temperature Range
  • Available in a 44 pin LQFP package
  • Pb-Free, RoHS Compliant Versions Offered

  • Interfaces to E3, DS3 or SONET STS-1 Networks
  • CSU/DSU Equipment
  • PCM Test Equipment
  • Fiber Optic Terminals
  • Multiplexers

Documentation & Design Tools

Type Title Version Date File Size
Data Sheets XRT7300 E3/DS3/STS-1 Line Interface Unit 1.1.2 May 2011 513.1 KB
Application Notes TAN-200, MaxLinear APIs - OS Portability 1.0.0 August 2007 88.5 KB
Application Notes TAN-075, DS-3/E3 LIU Layout Recommendations 1.0.0 February 2007 29.8 KB
Application Notes TAN-025, Interfacing the Microprocessor Serial Interface of the XRT730X Family of DS3/E3/STS-1 LIU Devices to the SPI Port of the MC68360 QUICC Device 1.3 July 2004 16 KB
Schematics & Design Files Schematic 1.0.0 January 2004 56.9 KB
Simulation Models
Package Type Vcc Temp Mode Version File
TQFP 5V Commercial 3
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Parts & Purchasing

Part Number Pkg Code Min Temp Max Temp Status Suggested Replacement Buy Now PDN
XRT7300IV LQFP44 OBS
XRT7300IV-F LQFP44 -40 85 OBS XRT75VL00IV-F
XRT7300IVTR-F LQFP44 -40 85 OBS
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Packaging

Pkg Code Details Quantities Dimensions
LQFP44
  • JEDEC Reference: MS-026
  • MSL Pb-Free: L3 @ 260ºC
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 53.2ºC/W
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: 160
  • Quantity per Reel: 1000¹
  • Quantity per Tube: n/a
  • Quantity per Tray: 160
  • Reel Size (Dia. x Width x Pitch): 330 x 24 x 16
  • Tape & Reel Unit Orientation: Quadrant 2
  • Dimensions: mm
  • Length: 10.00
  • Width: 10.00
  • Thickness: 1.60
  • Lead Pitch: 0.80

Notifications

Distribution Date Description File
07/12/2017 Product Discontinuation Notice
07/11/2017 Product Discontinuation Notification
12/05/2013 Addition of an alternate qualified assembly site, ASE Chung-Li (Taiwan). Alternate assembly site.

FAQs & Support

Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.

Submit a Technical Support Question As a New Question

Visit the product page for the part you are interested in.  The part's status is listed in the Parts & Purchasing section.  You can also view Product Lifecycle and Obsolescence Information including PDNs (Product Discontinuation Notifications).
 
To visit a product page, type the part into the search window on the top of the MaxLinear website.
 
In this example, we searched for XRA1201.  Visit the product page by clicking the part number or visit the orderable parts list by clicking "Orderable Parts". 
 
 
 

 

  

The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product.  Click Show obsolete parts, to see all EOL or OBS products.